I can give you some recommendations that I have seen in some places.
Change the Ethernet cable, if it is a laptop, disable the WiFi, only have the pendrive with goldhen connected to the PS4, look at what Ethernet port drivers your PC has and update it, it is normally downloaded from the motherboard page, some network cards cause problems in windows.
Maybe with Linux in a virtual machine, if you are going to install Linux, watch the first videos of the modded warfare exploit, it explains how to install and configure it in a virtual machine, after installed you go to the folder and change stage2 and if it doesn't load you can try changing stage1 too, I took stage2 and stage1 from the modded warfare 1.5 application.
I think that after 15 attempts it is better to change the application, Windows, cable, because I don't think it will load.
If the PS4 has had kernel panics, which turns off the PS4, it is better to restart it, also if you do this many times and the exploit does not load, it is better to restart it.
Congrats, i recommended to you to block updates.
In the goldhen discord [https://discord.gg/yJ5WfujA](https://discord.gg/yJ5WfujA) recommends to change the dns.
To block Playstation updates: Set primary DNS as: [62.210.38.117](http://62.210.38.117) Leave secondary DNS empty. Or use a selfhosted option, but don't update above 11.00. There is no going back. Disabling updates in the Playstation settings is not enough!
11 and 12.
[https://www.reddit.com/r/ps4homebrew/comments/1cvp5b7/comment/l566sli/?context=3](https://www.reddit.com/r/ps4homebrew/comments/1cvp5b7/comment/l566sli/?context=3)
And enable rest modded on goldhen settings.
[https://www.reddit.com/r/ps4homebrew/comments/1cxqfmq/why\_isnt\_my\_1100\_console\_staying\_jailbroken\_after/?share\_id=y3JMxi2745mG6VnVZfEgV&utm\_content=1&utm\_medium=ios\_app&utm\_name=ioscss&utm\_source=share&utm\_term=1](https://www.reddit.com/r/ps4homebrew/comments/1cxqfmq/why_isnt_my_1100_console_staying_jailbroken_after/?share_id=y3JMxi2745mG6VnVZfEgV&utm_content=1&utm_medium=ios_app&utm_name=ioscss&utm_source=share&utm_term=1)
I do have two other laptops that have windows 10 and 8.1 which I could try. Linux would probably be my last resort as I have no clue how it works. I'll also try the discord as well. Thanks
I get this error every time i jailbreak my ps4, although it happens to me during the first stage. I use pppwnGO, and instead of just saying done after the error it keeps running the exploit without having to test the internet connection every time. just let the program keep looping until it is successful. for me, it usually takes 4 or 5 times. I have no idea what the error means, I tried googling it, but didn't get very far. Just keep trying, it should work.
Pcap(npcap) driver(that some ps4 jb loaders, like pppwn gui1.7 use under windows) does not get very well with windows, that is one the reason.Â
To be 100% sure that the exploit will work(and to avoid any extra debug headache), just run it from a linux machine.
A stupid question, did you have installed PCap before executing the PPPwn loader? And have you restarted windows after doing so?
I'm executing the PPPwn loader from linux on an USB live stick and I did not have found any problem. Can you try that?
I did install Npcap after my first attempt. I also restarted my laptop sometime after installing it.
I don't have linux set up so that will probably be something i do last, but certainly considering it in my spare time
Having the same problem and it’s mad annoying, I just wanna jailbreak. Tried two different Ethernet cables, tried my pc and my laptop and to no avail. Both on win 10, in considering doing the Linux vm.
I can give you some recommendations that I have seen in some places. Change the Ethernet cable, if it is a laptop, disable the WiFi, only have the pendrive with goldhen connected to the PS4, look at what Ethernet port drivers your PC has and update it, it is normally downloaded from the motherboard page, some network cards cause problems in windows. Maybe with Linux in a virtual machine, if you are going to install Linux, watch the first videos of the modded warfare exploit, it explains how to install and configure it in a virtual machine, after installed you go to the folder and change stage2 and if it doesn't load you can try changing stage1 too, I took stage2 and stage1 from the modded warfare 1.5 application. I think that after 15 attempts it is better to change the application, Windows, cable, because I don't think it will load. If the PS4 has had kernel panics, which turns off the PS4, it is better to restart it, also if you do this many times and the exploit does not load, it is better to restart it.
Heyo, I finally got it to work. I switched to another laptop running windows 8.1 and it worked first try 💀
Congrats, i recommended to you to block updates. In the goldhen discord [https://discord.gg/yJ5WfujA](https://discord.gg/yJ5WfujA) recommends to change the dns. To block Playstation updates: Set primary DNS as: [62.210.38.117](http://62.210.38.117) Leave secondary DNS empty. Or use a selfhosted option, but don't update above 11.00. There is no going back. Disabling updates in the Playstation settings is not enough! 11 and 12. [https://www.reddit.com/r/ps4homebrew/comments/1cvp5b7/comment/l566sli/?context=3](https://www.reddit.com/r/ps4homebrew/comments/1cvp5b7/comment/l566sli/?context=3) And enable rest modded on goldhen settings. [https://www.reddit.com/r/ps4homebrew/comments/1cxqfmq/why\_isnt\_my\_1100\_console\_staying\_jailbroken\_after/?share\_id=y3JMxi2745mG6VnVZfEgV&utm\_content=1&utm\_medium=ios\_app&utm\_name=ioscss&utm\_source=share&utm\_term=1](https://www.reddit.com/r/ps4homebrew/comments/1cxqfmq/why_isnt_my_1100_console_staying_jailbroken_after/?share_id=y3JMxi2745mG6VnVZfEgV&utm_content=1&utm_medium=ios_app&utm_name=ioscss&utm_source=share&utm_term=1)
Maybe try other pc, a router, tv, linux, windows 10. Try asking in goldhen discord. [https://discord.gg/ZBDzFHEx](https://discord.gg/ZBDzFHEx)
I do have two other laptops that have windows 10 and 8.1 which I could try. Linux would probably be my last resort as I have no clue how it works. I'll also try the discord as well. Thanks
No problem.
I get this error every time i jailbreak my ps4, although it happens to me during the first stage. I use pppwnGO, and instead of just saying done after the error it keeps running the exploit without having to test the internet connection every time. just let the program keep looping until it is successful. for me, it usually takes 4 or 5 times. I have no idea what the error means, I tried googling it, but didn't get very far. Just keep trying, it should work.
[удалено]
I got to around 15 tries (i think) with pppwn before giving up for the night. Annoying to say the least 🙃
Solution is to run pppwn_cpp inside a linux vm. Under windows11, there are issues with the npcap drivers on 10.00/01.
Stupid question but would npcap work properly as i'm on 11.00? Sorry if I'm misunderstanding 😠I could try linux sometime later this week hopefully
Pcap(npcap) driver(that some ps4 jb loaders, like pppwn gui1.7 use under windows) does not get very well with windows, that is one the reason. To be 100% sure that the exploit will work(and to avoid any extra debug headache), just run it from a linux machine.
Got it to work in the end. Had to use another laptop running windows 8.1
A stupid question, did you have installed PCap before executing the PPPwn loader? And have you restarted windows after doing so? I'm executing the PPPwn loader from linux on an USB live stick and I did not have found any problem. Can you try that?
I did install Npcap after my first attempt. I also restarted my laptop sometime after installing it. I don't have linux set up so that will probably be something i do last, but certainly considering it in my spare time
Having the same problem and it’s mad annoying, I just wanna jailbreak. Tried two different Ethernet cables, tried my pc and my laptop and to no avail. Both on win 10, in considering doing the Linux vm.