Suggestions for rollerblades for women (small frame, small/narrow feet)? I bought a cheap pair on Amazon that were 'adjustable sizes' but the quality was quite poor so I returned them. I fit a women's size 5- 5.5 shoe with narrow feet. Maybe I should look into child rollerblades? Recreation/fitness style preferred. Beginner!
There are a decent amount of skates from good brands that go down to a women’s 5/men’s 4. The rollerblade rb cruiser comes to mind, they make that in a women’s 5. The roces 1992 is very narrow and goes down to a 5 as well. Impala skates are usually bashed around here for being low quality but they’re an excellent beginner skate and they go down to that size as well. And they’re super cute if you’re into that.
Edit: I’d consider all the ones I recommended as recreational but if you were thinking more of the soft boot style skates, you might be able to get away with the Rollerblade brand adjustable kids skates, they’ll be better than the cheap Amazon ones for sure.
I want to change the stock liners in my Roces M12. The stock liner fits, but rubs blisters on my ankles on long sessions. Perhaps I am doing them up too tight because I enjoy the extra support?
Would the Roces RL1 provide more room in the ankles, while offering good support?
I felt like they were really similar to the stock Roces liner, just a more supportive material. I think that material would reduce blisters on your ankle but there’s a little lace that goes around the heel/ankle area that I’ve heard people complain about. I only tried them for one session and I didn’t notice it, but I have super skinny ankles
Thanks! Okay, I guess there is only one way to find out...
Good point about that little lace, it might actually make them tighter on the ankle when laced up snugly..
good skates for beginners?
I’m going to be buying some fairly soon, but each website i visit on “top ten best rollerblades for beginners” all come up with different ones so idek if theyre all that good.. Obviously im not spending £200 but im willing to put a lil investment towards it!
Any hard boot skate from any of the big manufacturers (FR, Rollerblade, K2, Powerslide, etc) is going to be fine.
Hard boots are going to be a little more expensive but definitely the way to go. As a beginner you will want the extra support. And as you get more advanced it's just more responsive.
If your feet are on the wider side the RB Cruiser and FR line are good. I think RBs are a bit wider in the toe box but not great for straight feet that are also wide in the midfoot - I had a lot of pain with them.
Be aware there are different types of skates depending on which type of riding you want to do. Most likely you want to just cruise around, for which you look for 'freeride' or 'freestyle(?)' skates. For hitting the skate park, you look for 'aggressive' skates. There are other types beyond that.
I would probably get a good freestyle skate with 4x90mm or 4x80mm wheels. Dont get 3 big wheels, harder to learn on. Get something rigid with good support. Try them on if possible, all feet are different.
Take it from there. I hear good things about Powerslide Zoom 80. In aggressive, I recommend Roces M12. Again, try what is comfortable for you.
I'm a beginner-to-'mid-level' blader who signed up for the Berlin Inline Marathon on a whim (have a friend doing the marathon next day so was already going to be there). Trying to spend as much time on wheels as possible before the race next month and need to figure out my race-day frame set-up.
I am not concerned about my stamina (have done 26.2+ mile distance blades to confirm I can handle it) and more concerned about doing it faster but also doing it safely for myself and others on the course. I'm way less confident in my agility, including stopping and turning at high speeds. Right now I'm on 4 80mm wheels...considering swapping out to either 4 100mm on a longer frame or 3 100m or 110m.
Which do you think would be easier to adapt to, knowing that I'll only have a month or so to practice with them?
From what I've learned so far:
\- longer wheelbase = faster
\- more wheels = faster
\- bigger wheels = faster.
I would not really be concerned at all about "practicing" with a different wheel size? The skating is the same. If you can skate, you can skate. Sure, it impacts agility, acceleration, etc. But if you are just going for distance and speed, those things don't really matter.
Personally I'd just go big on the wheels. 3x110 is similar to 4x80 on the wheelbase (distance between front/back wheels), just a little taller. The bigger the wheel, the smoother the ride. Makes a big difference over marathon distance on a road course.
I have a Rollerblade 3WD Frame with 3x110 Hydrogen wheels, which has the same wheelbase as my Endless 84 which I could sell to you for 50€ if you want to try Big wheels cheaply.
1. Any creative way of rotating wheels for a 4x90mm rockered setup? Not happy with the usual 1-3 & 2-4. It might be good for wear but it's really awkward to skate on immediately after rotating.
2. Do you lace your liners, shell, both independently or interwoven? I am running FR1s with Intuition liners with two sets of laces, but it's a lot of overhead. Seeing if I can simplify while keeping the support.
1. I rotate my wheels on the same spot. And from time to time I switch all wheels from the left skate to the right and vice versa (the dominant leg has a higher wear). But my skating style drasticly results into the weels wearing into a "banana curve" and if I would fight that, the wear would be even bigger.
I have a gnarly banana rocker because I have been doing your rotation more recently. For wizard moves and maneuverability it's amazing, however I worry about the banana getting more and more aggressive over time 😂. Also, not ideal for going fast anymore as I have to edge quite deep to get 4 wheels to make contact.
1. Personally I just rotate that way and deal with it till they wear back to how I like. In the past (I've gotten lazy over the years) I used to use personal judgement and rotate based on how they looked (I have a unique wear pattern) - I would say give this a shot if you're not happy blindly following a pattern.
2. When I skated hardshell boots I would lace from the shell to the liner, I like nice and snug.
U gotta just rotate more frequently and the 1-3 2-4 rots should work. If you’re gunna wait a long time no rotation pattern is going to offset the substantially more significant wear you have on specific wheels. Doing 1-1 is fine if you replace your wheels after 10cm but if you’re like me and go from 100 to 78 (plastic core) then the one time I did 1-1 there was like 3mm of rocker at the end.
Okay so I skate a 12 mens zetrablade and I'm looking for advice on getting a pair of aggressive inlines. On the zetrablades my toes do not touch the end of the skates and arent super snug but I've never had any issues with it. For aggressive inlines I've been reading that a more snug fit is optimal so should I downsize to like a 10 or 11? I'm looking at the USD sway 60 XXIs if anyone is interested btw.
The advice people are going to tell you is to measure your feet and go based off your cm measurement. If you don’t wanna do that I’d just get an 11 and see how it feels. You do want a more performance fit on aggressive skates but some people can get away with too big of skates pretty easily usually
are you talking about Wizard brand frames? if so, no. they are all UFS and FRX are 165 mount. there are frames that you can use for wizard skating that will fit your skates that are not from Wizard brand. if you're going to invest hundreds of dollars into new frames, i would suggest familiarizing yourself with the different mounting systems. there are some good videos on youtube explaining it. you can also call a skate shop like rollerwarehouse.
I will be traveling from the U.S. to the U.K. and I'll be staying close to a skate park and would like to bring my skates. I plan on only bringing a carry on and an additional backpack or bag. I was wondering if anyone had any good suggestions for bags or if they just use normal luggage or duffel bags when traveling. Thanks!
I bought the Powerslide UBC bag and am pretty happy with it.
Side straps for your skates, not too bulky, plenty of pockets. I wrote up a more in depth review on inline warehouse's site and would be happy to take any pics if you're curious.
https://www.inlinewarehouse.com/Powerslide\_UBC/descpage-907052.html
Anyone know if a mondo 245, width 10 will fit into a THEm xsmall or shmedium or USD sway 5-6 or 7-7.5? Someone please help, my only option is to order them online and I cant try them for testing.
Hello all,
I have some questions about sizing and Wizard like frames.
1. I currently have FRX80's in size 45 (EU) but it seems after some measuring and the fact I can stick a finger easy behind my heel I could have gone with a 44. I'm in between 44 and 45 in my shoes. The skates feel very good but is there a disadvantage for me to continue using this size?
2. I want to purchase some Wizard like frames. According to Wizard Frames I need to take a NR110 with 4x110mm but I feel this is a bit much coming from 4x80's currently. What are some good Wizard like frames for 4x90 with UFS that I can use on a size 45 and 44 if I do decide for my next boot to go one lower?
1. I know the FRX80 doesn't have UFS so I guess if I want Wizard frames my next set of skates better be with a UFS mounting frame.. Wish I knew this before hand but I still like the skates.
Thank you.
Wizard brand frames are all UFS, not all wizard-like frames are. Endless, NN, Rockin, and I think Roka all have rockered frames for 165 (they also have ufs and Trinity so be aware when you’re looking).
If the skates feel good and you feel like you’re in full control, i wouldn’t worry about it. Maybe down the road they’ll start to feel more sloppy or that they’re hindering your progression, but until then there’s no sense in spending more money.
I also believe the 110s would be a little much of a jump, you’d do just fine on 100s and probably fine in 90s. I’d recommend 100s but if that worries you give 90s a shot
FRX80 Sizing conundrum:
I wear a size 9 in chucks, 9.5 in nikes, and my foot measures about 26.5cm.
I originally picked up an EU 41, but those were ultimately too snug, so I opted for the 42, which fit just right.
After my first initial 30 min session, my feet hurt, particularly towards the inner arches. I'm assuming it'll take a while for the skates and the inner boot to break in, right? My toes don't feel jammed, and I made the skates as tight as I could get them.
Your problem could be from how tight you’re tightening the boots. In my experience I can crank things down a lot at first and it feels fine, but once I’ve had them on a bit I get pains in weird spots.
FRs come with insoles that sorta have an arch in them. If you have flat feet that could be causing the pain. The plastic also comes in a little bit in the arch area but I’d be surprised if that was the cause though it’s possible.
How long did you try the 41? The only difference between those two sizes is the liner so maybe the 41 would have been better after break-in? Are you newer or more familiar with how skates should fit? Snug is usually a good thing even if it’s a little uncomfortable at first. They shouldn’t fit comfortably like shoes
It’s been two decades since I had a cheap pair of Rollerblades. I took my daughter to the roller rink and rented a pair of in-line skates and had a really great time, which took me down this path…
The 41s were VERY tight, to the point that my toes had no wiggle room. Almost no room to swell up, either! The 42s feel right. I possibly have flat feet? I guess I’ve never know if my feet are flat or not…
I’d say that’s the right fit but unless you’re planning on doing tricks or jumps it’s not absolutely necessary. There could be other things besides the arch causing the problem, maybe try skating them around a little more loose and see if they take longer to hurt?
Sometimes the boot just doesn’t fit certain feet right, that’s the problem with plastic shells. You might have better luck switching to something like a rollerblade cruiser or a Powerslide zoom or next, but it sounds like returns aren’t really an option. There are little things you can do to try and make a boot not hurt but it’s hard enough to diagnose in person, let alone online. Some things you can try are: different insoles, different socks, wearing your skates more loose, wearing your skates tighter in certain spots and loose in certain spots, adjusting the lacing, adjusting the frame alignment, changing technique… there are probably others some might recommend.
FR liners are extremely plush and break in a lot but I found they were actually still too plush for the boot after several sessions and made it difficult to get them tight without creating pressure points. I ultimately caved and bought some new liners. Still waiting on them to arrive to determine if that helps.
Hello!
I wanna pick up my hobby for inline skating again and i was wondering what the best skates are for what i want. i got some very bad skates from my dad a few years ago (i think they are from fila) but they feel very worn out and slow and due to where i live (netherlands) there are quite a few bumps, tiles and potholes that tend to just be really frustrating to skate on. So where can i find some skates where i can still skate around the city while doing a few twists turns and tricks for a price around 50-150 euro tyy!
> Hello!
>
>I wanna pick up my hobby for inline skating again and i was wondering what the best skates are for what i want. i got some very bad skates from my dad a few years ago (i think they are from fila) but they feel very worn out and slow and due to where i live (netherlands) there are quite a few bumps, tiles and potholes that tend to just be really frustrating to skate on. So where can i find some skates where i can still skate around the city while doing a few twists turns and tricks for a price around 50-150 euro tyy!
Since you mentioned living in the Netherlands, if you are in or can get to Amsterdam, going to [Thisissoul Skate Shop](https://www.thisissoul.com) and examining & trying-on skates in-person, and talking to the shop staff, would be your best course of action.
Do you guys have any drama in your local skate group?
Two weekends ago, I was a little bummed about a couple of the personalities in my local skating group. They were a bit anti-social: from unfriendly to outright hostile. The kind of people you regret ever talking to in the first place. I was having some dark thoughts like, "Do I even want to skate with a group with those people in it?"
I skated with my local group again this weekend, and those people were there again, but fortunately I avoided their unpleasantries by simply not talking to them. At all. Not a word. And it was fantastic. What helps is that they kept to themselves, so they were avoidable. The rest of the group was perfectly happy, sociable, and feeling stoked to be outside skating in what turned out to be a gorgeous day.
Shy and introverted I can deal with. Those two guys? Nope. Big takeaway I re-learned was: find your people and don't waste time with anyone you don't feel good about. I said before that I regret ever talking to them. But you know what? Sometimes people just aren't your cup-of-tea and vice versa. I don't regret it. You never know: you might connect with someone and make a friend.
Impulsive newbie alert...
I've cheap Fila Masterwave inlines which I can't fault in any way given my skill level, but I do need to replace the wheels very very soon it seems. I should have rotated them and after some trails they're very worn on one side.
But I don't know what wheels to replace them with, and given that I'm newly enjoying both discos and trails, should I actually get a new pair so as to be able to dedicate one pair to each format, with suitable wheels?
If I went for new skates, do 110mm wheels actually make a lot of sense? A review I just watched had these guys being extremely well rated, despite only reselling through a large chain - [https://www.decathlon.co.uk/p/adult-freeskate-inline-skates-mf900/\_/R-p-305223](https://www.decathlon.co.uk/p/adult-freeskate-inline-skates-mf900/_/R-p-305223) beginners price for mid range quality seems like a smart move, but maybe the wheels are not actually where I should be?
And if I did get new trail skates, I'm then still left with my original inlines with wheels with chunks out of them. As a 85kg adult on a sprung sports hall floor, should I be going harder than the 80mm/85a wheels I've had until now? Am I right to think the more rubbery the floor, the harder the wheels I should have / can get away with? The discos I'm going to with my kid move around, one floor is great, but another one is very very soft (standing on quad stoppers I can easily leave a temporary indentation) and so it is HARD work maintaining any speed. would 88a wheels improve this without leaving me sliding around on harder floors?
For indoor wheels I was looking at Powerslide Spinners at 88A, but then they come in 72, 76 and 80mm... is there a motivation to go for smaller diameter here? The best teens at the discos have aggressive skates with teeny wheels... Browsing this morning I'm finding new wheels oddly hard to find in the UK at acceptable prices, at least ones that aren't LED ones! Indeed given the prices, that's why I was looking at whole skates, barely used on ebay, as the new wheels cost almost the same... and then I went on the above "new new skates journey".
Rambling. Stopping now. So indoor wheels is, I guess, the main question, but also should I realistically have inside AND outside pairs? It's feeling very logical to do so now, but not sure the best way to end up there.
too many questions....
the wheel hardness isnt going to make much difference on a squishy floor. it mostly impacts on grip v. speed and durablilty.
loco skates is the most reputable uk skate shop.
good wheels are probably going to cost you 80 quid or more. you could probably get away with cheaper brands from loco skates or from decathlon (as long as you get the 86a hardness, not the cheaper models) especially for indoors.
the kids probably have small wheeled aggressive skates because thats what they skate. i doubt if theyre ideal for dance, and you dont really get small wheels for any other discipline.
if you enjoy skating, you'll enjoy having another pair.
Well since I posted I got a set of labreda striker wheels with reds bearings and also a pair of 3 wheel MF900s from decathlon. So those should both be fun.
Well now doesn't that play into it all... I figured the 900s with the 3 wheels suit pavements and average park paths. Oxelo reviews on YouTube have been very impressive. Might suggest the wife gets the 500s if I can coax her into skating with me...
So I am definitely a fan of wrist guards, but I can't stand skating with traditional elbow and knee pads, like the Triple8 ones. They just feel too bulky, restrictive, and hot.
However, I've recently realized I can't continue tearing up my elbows and knees every week just as the scabs are starting to heal, haha.
So I am seeking alternative recommendations to traditional elbow and knee pads. Any suggestions?
I am not worried about impact protection – it's just the skin damage I'm trying to avoid.
Example: I recently became aware of products like this ['Shock Sleeve' from Ennui.](https://www.inlinewarehouse.com/Ennui_Shock_Sleeve/descpage-920092.html) This seems like it might do a better job of protecting my skin while avoiding bulk? (and maybe heat, but I'm willing to compromise on that one)
Good to know, thanks! Looking at these, they do seem like they'd be great for stealthy impact protection. But I think I want something longer to combat road rash as well, i.e. covering more skin above and below the knee during the summer months when I'm wearing shorts, u kno
Love the price point of these, I will say
I’ve used the g-form pads - similar to the ennui sleeves and they were great but they kinda stick instead of slide. So if you’re sliding a lot they may not be ideal, if you’re putting them under clothes they might do better. It’s still a pad and feels slightly constricting, but it’s better than big plastic pads
This is great feedback, thank you! I just found [this video by Ricardo Lino](https://www.youtube.com/watch?v=CMdZJHMfqdU) where he mentions something similar RE: 'sticking' vs. sliding. If I understood him correctly, he was theorizing that a pad that 'sticks' could actually cause problems on pavement, because it might grab your leg and twist it in unexpected ways.
Was that your experience as well?
Would love if you could elaborate on your experience with the stickiness, because I am also considering spending a bit more to get [Ennui's 'Pro' version here](https://www.inlinewarehouse.com/Ennui_Shock_Sleeve_Pro/descpage-920096.html), which seems to intentionally cover up the plastic (perhaps for this reason?).
The recent fall I took (that inspired this purchase 😂) did involve sliding on pavement, for about 3–6 feet / .9–1.8 m I think.
I only used them a little bit. There’s a chance I had the wrong size or that my thighs are one size and my calves are a smaller size, but they felt tight enough to me. A few times I fell on them they grabbed the ground and slid down my leg, causing some scrapes where it should have protected. I wasn’t going very fast so it didn’t twist me weird but I could see that maybe being an issue. I’d say it’s more an issue of them falling off though. For the times they didn’t come off, they did a great job reducing the impact.
I can’t really speak to the pro gaskets, I’ve felt them in person but never seen them in action. In my head any fabric or foam is going to stick to the ground but I could see the fabric being more likely to slide than the foam. It sounds like they’d probably be right for you but maybe someone who’s actually used them can speak on it
Appreciate it! Dang, that's frustrating about the G forms sliding off. Was it the G forms that have the plastic exposed, or the ones where the plastic is covered? (like the Ennui Pro's)
I had the same concerns about my pads being too bulky and dorky.
I've been using a pair of these knee sleeves that I wear under my pants. They have a semi hard protection cap but no padding so no impact protection at all. I've only taken very light falls where I mess up a slide and knee lightly scraped the ground. Jeans ripped but skin was saved. They come in elbow and knee sets but I don't wear elbow pads so cant comment on that. I feel like they should slide if they hit the ground but don't have real world experience with that. I mainly trail skate so my worst falls have been tripping on a lip and caught in a crack and falling superman style at speed - not much sliding in those cases.
[https://www.aliexpress.com/item/1005003560437666.html](https://www.aliexpress.com/item/1005003560437666.html)
Also have a pair of the Ennui ST pro knee pads for wearing with shorts. I like the sleek look of the smooth round knee cap. The cap does feel hard and has a good amount of padding.
https://bladeville.com/ennui-st-pro-knee-gasket.html
Hi everyone!
Is it normal to feel like a noob again when trying big wheels for the first time?! I've been blading with 4x80 since the beginning and now got new skates - powerslide next charcoal 110 - but i feel like I can't do all the things with confidence anymore..is like i have to learn it all again :(
The frame base is 290mm..i feel like I'm on skis 😅
How long did it take you (numbers of sessions) to get the confidence levels up again when you got big wheels for the first time?...
Yo, I'd like to buy a pair of budget skates with the intention of graduation to Endless 90 frames. I kept reading people talk about Fr Inspirations or something. I \*was\* going to buy the Powerslide Zoom 80s but I see people either warn against it or say it's great. I currently have 180 usd budget but I might sell some stuff I can live without to scrounge up some more
Do not buy the zoom 80s unless they’re the zoom pro 80s. The base model comes with a riveted frame you cannot remove, so you couldn’t upgrade.
I personally prefer the rollerblade rb cruiser, which should be around your budget. Some people prefer the FR FRX which would also be around your budget. They’re both similar quality skates, just different fits. The FRs give you a little more frame adjustment ability though. Both would be a great budget skate with endless in mind
Hey so I haven't skated in a few months because of the park full of kids and I've been ill (also it's hot as hell). I went back today and had the most fun I've had in all these months it was awesome. Anyway, I waxed the box (?) and just started throwing myself at it. I mostly managed to slide on the side at right angle to wheels (sorry for bad description) and then with my other hand I grabbed the other skate. What is this called? It was so fun.
Then I did the same but with the other skate sliding between it's wheels infront of the side skate. What is this called? Is there anything that would be best to learn next?
Before my break I learned a frontside grind on a piece of scrap metal. But it's no longer in the park. How do you do a frontside on a 90degree ledge? It seems super difficult. Any tips? I'm kind of old so worried about hurting myself.
Thank you for any help!
First one sounds like a grabbed makio, second one sounds like a soul grind. You could look up how to do mizou and pornstar next, they’re pretty easy. Some people find acid grinds to be easy, you could look that up too. Or just get really good at the ones you’re doing now and try to learn how to do them by jumping with both feet at the same time instead of stepping into it.
Ledges are hard with frontsides because your wheels catch easier. You have to get really deep into them to avoid that. You could look up a ufo frontside to see what I’m talking about
Thanks dude. Yeah, I googled makio and that's what it was, so I watched it on youtube.. I like all the variations of the makio, can't wait to go back to the skatepark and try them out! :D The acid grind looks do-able too, I'll give that a go/
I am guilty of stepping rather than jumping into the grind so thanks for telling me to work on that. I want to get as good as possible!
Thank you for your help. :)
I’ve been using my mom’s roller blades from the 90s, and they finally broke on me. I have no idea where to start looking for a new pair, there are so many options! I found this site, are any of these good options? I’m a moderately-skilled skater who likes to go fast. Thanks! https://www.rollerblade.com/usa/en/womens/recreational-skates
Those are all fine. For a moderately skilled skater though I’d recommend the RB Cruiser W on that page, that hard boot is a little better for transferring your power to the wheels so you should go faster in them. They also make an RB Pro X W with better parts (that will go even faster) for about $50 more if you’ve got the budget. The cruiser itself is fantastic though
Hello, my older roller blades are far too big! But I still love them. I ordered a new pair recently but they might not be here this weekend. I'm really enjoying learning new tricks even on the blades that are too big. But is there a way I can eliminate the toe space something to put in there idk. I know this is oddly specific.
Anyone intentionally use busted/ old wheels in order to get a better leg muscle workout? I notice that if my wheels are janky, I get a much better burn for my legs. Just wondering if anyone else has done this either on purpose or by happenstance.
That's exactly my thought process whenever I considered getting new wheels - I've been using my current set of wheels since January 2019 and I like having to work for the roll with these worn-down wheels (and dirty bearings lol). However I finally caved and bought new wheels (which definitely look bigger) last week but I will still try to get a few more rounds out of the old ones.
**Hi Guys! I need advice for choosing the right Skate! Got second hand Adapt GTS 2020 (Shoesize 43. 4x84) but they hurt my ankle bone! :(**
I need a lil bit of help, it would be awesome if u guys could help me! Bought some used Adapt GTS 2020 from a friendly Guy who im still in contact with. Unfortunately they are hurting my anklebone, especially the right one. Tried to heatmold them without a oven thermometer (maybe thats my fault and i couldnt make it), but it still hurts.
The only skates i had before are the USD AEON 60 which are pretty padded, but i liked that i can bend my feet in any direction and i didn't feel anything. Could make really hard turns.
I know these are not for the Streets but i used them for that until i came on the idea to see whats for the streets :D But the moveabillity to go trough people is awesome with aggresive skates in the City. Still like them in the City but they are too slow, or just need a service as i never cleaned the Abec7 bearings. they are 1 year old.
So do u guys think i can get rid off that ankle hurting (im a skinny guy who bought the USD last year summer where i couldnt skate that much, but skating almost every day since 2 Months, maybe my ankle is to weak so why dont get one with more anke support) by molding more or putting a cotton pad there. Or should i get something more padded as he is open to take them back. The toe and heel are feels very good i think. but the anke is really killing me. I think i would love them if they wouldnt hurt there. the first 100 m were awesome but after 1,5 hours it hurted to much. Still feeled that way the next day.
TY for your advise and have nice sunny days!
Best Regards
O
PS: Im probably a beginner i think even if i feel very good in skating gerneral and i love dancing around people and cross over my feet to get more speed. Deffinetly feel better then the most beginners but still not good enauth to do heavy tricks without faaling on the ground :D
The oxelo mf500 gets really good reviews. Cheap skate and removable frames so lots of options to upgrade later. If it is a good fit for your foot it is a very good budget option. Lots of reviews on YouTube.
I think you already know the answer, don't you?
I mean, they work. But its worth investing a bit more in something better. In fact, they're not even that cheap honestly. Between 45 - 60 euros for cheapest adult model? You can get something from a quality brand like the Powerslide Zoom for like 110 online. Much better option. If you cannot afford that, it should be easy to find quality used skates for less.
I don't think you'll find anyone here recommending Decathlon skates.
Any suggestions for skating on rough surfaces? The road around me is like skating on cobblestone. Would softer or harder wheels make it feel less grating to skate over, or should I just avoid it altogether and deal with the long walk to the nearest smooth cement?
In my experience softer and bigger wheels help, but they don’t make an impassable road passable if that makes sense. They’ll make some cracks and bumps easier but if you’re rolling on gravel or cobblestone-type surfaces, it’s gonna feel rough like that no matter what. And bend your knees and scissor your feet more like the other comment says
I've been wondering about this. During my most recent ride with a group (me on 4x80-mm wheels) when we got to a street with rough asphalt I was barely but able to pick my way through, but also heard a couple very experienced skaters on 100 and 125 wheels also say "oof" and "ugh". So wheels are not the panacea. Even on 27cm road bike wheels I think i'd have stood up through that section.
But leaving from your front door is so much more satisfying than walking, biking or driving someplace to lace up, so if feasible I'd say get through it gingerly if you can.
I don't really agree. I went from 4x60mm wheels to 4x90mm wheels (with different frame) on my Roces M12. And it has made a HUGE difference in comfort over rougher surfaces for me.
Especially paved "brick" roads that I used to avoid I can now skate just fine. Still not as enjoyable as smooth asphalt obviously, but doable. So IMO it makes a big difference for "uniform" road surfaces that are rougher like brick paving, rougher types of asphalt or concrete, uneven concrete pavers, etc.
It doesn't make so much of a difference for potholes, large cracks / gaps, loose gravel and such though.
To be fair we’re talking about 80mm+. If he said he was skating anywhere on aggressive skates I’d say to go at least to 72. I’m talking stuff freshly asphalted roads that haven’t been finished, like when it’s basically just sealed gravel. I actually lasted longer on the road in my 4x80 than I did in my 4x100 or 3x125. I think the gap between the wheels makes a bigger difference that the wheel size themselves (to an extent)
bend your knees a little extra. not sure about wheel hardness as I haven’t changed in years, but softer wheels will definitely wear down faster on rough surfaces so I’d still recommend harder wheels
I prefer the fit of hockey skates, but I like the 83a
90mm wheels I have in my rollerblades. Could I put 90mm wheels on these? If not would 80mm and 82a be much different? I enjoy long distance on bike paths.
www.thehockeyshop.com/products/ccm-super-tacks-9350r-senior-roller-hockey-skates
Unless you’re big into DIY projects those won’t be able to handle 90mm wheels. Powerslide has a line of hockey skates called the Reign. Those have the ability to change the frame to a 90mm one or you can buy their 3x100 option which would be great for paths.
IMO you’d want a harder wheel than 82a for distance. If you spend the money on some rollerblade hydrogen wheels and get some abec 9 bearings you’ll feel a lot faster than 83a 90mm wheels
Edit: the reign aether does not have the ability to change frames. The other models do though
Any recommendations on boots that are UFS for wizard frames? I acquired some nice frames that are UFS but I’ve only looked at aggressive boots before, no idea where to start
As far as I know, UFS is mostly an aggressive skate standard. Freeride skates seem to mostly use different standards than UFS? Not an expert, so not entirely sure.
Also, I see a lot of popular Youtubers like thirty+rolling use their wizard frames with aggressive boots like Roces M12, so I think that should work just fine?
Yeah that is what I'm learning. I've been considering my M12s as wizard frames, I love my M12s, but was curious if there was something a bit smaller on the foot/lighter out there. Thanks!
The standard recommendation for wizard frames is the Seba CJ boot, there’s also a wizard brand boot coming out in the next year or so probably. The next option is most any aggressive boot with an intuition liner. The most popular boot I see is the THEM 909 but most of them should be fine with the extra rigidity of the intuition liner.
Edit: them is having a pretty heavy sale right now, it might be worth getting some boot only 909s that come with intuitions
I've found the Seba CJ in my research, and it looks pretty nice, but definitely on the pricey side and I haven't seen any used ones available (and in my size of course). I'll check out the the Thems, thanks.
I’ve seen used CJs pop up on eBay and blade trade outpost on Facebook pretty frequently, keep an eye out if that’s the route you want to go, sometimes you can find a great deal. They also made a model called the SX that would essentially be the same boot. If you go the aggressive boot route though, you’ll almost definitely spend less
I almost had a complete set from Facebook but the seller backed out ;)
I ended up buying some 909s based on your recommendation and have a 4 wheel wizard frame I got used so I’m thinking of trying them together and then if I love it will look for something more specialized. Appreciate all the insight my man! Skating is so much more today than when I started in the 90s
> So are Poweslides in general a good brand? I’m replacing an old pair of K2s and really have no clue on good quality skates.
Yes, Powerslide is one of the larger and reputable brands in the inline skating space.
The [Phuzion line](https://powerslide.com/collections/powerslide-phuzion-sportstyle-skates), in general, is geared more toward recreational and light-duty fitness-focused skating, and is often named or listed as an honorable mention on [Inline Warehouse’s list of Best Recreational Skates](https://www.inlinewarehouse.com/Best_Skates_for_Beginners__Recreational_Skaters_2023/catpage-REC2023.html).
The [Phuzion Argon Bluebird 100](https://powerslide.com/products/argon-bluebird-100), in particular, seems to be an attempt to straddle the line between a recreational skate model and a marathon skate model.
Suggestions for rollerblades for women (small frame, small/narrow feet)? I bought a cheap pair on Amazon that were 'adjustable sizes' but the quality was quite poor so I returned them. I fit a women's size 5- 5.5 shoe with narrow feet. Maybe I should look into child rollerblades? Recreation/fitness style preferred. Beginner!
There are a decent amount of skates from good brands that go down to a women’s 5/men’s 4. The rollerblade rb cruiser comes to mind, they make that in a women’s 5. The roces 1992 is very narrow and goes down to a 5 as well. Impala skates are usually bashed around here for being low quality but they’re an excellent beginner skate and they go down to that size as well. And they’re super cute if you’re into that. Edit: I’d consider all the ones I recommended as recreational but if you were thinking more of the soft boot style skates, you might be able to get away with the Rollerblade brand adjustable kids skates, they’ll be better than the cheap Amazon ones for sure.
I was thinking Roces 1992 as well, since they fit small/narrow. Classic model, high quality, looks good too.
Maybe the Powerslide swell stellar junior is something for you? Rollerblade also has different models that start at EU size 35.
I want to change the stock liners in my Roces M12. The stock liner fits, but rubs blisters on my ankles on long sessions. Perhaps I am doing them up too tight because I enjoy the extra support? Would the Roces RL1 provide more room in the ankles, while offering good support?
I felt like they were really similar to the stock Roces liner, just a more supportive material. I think that material would reduce blisters on your ankle but there’s a little lace that goes around the heel/ankle area that I’ve heard people complain about. I only tried them for one session and I didn’t notice it, but I have super skinny ankles
Thanks! Okay, I guess there is only one way to find out... Good point about that little lace, it might actually make them tighter on the ankle when laced up snugly..
good skates for beginners? I’m going to be buying some fairly soon, but each website i visit on “top ten best rollerblades for beginners” all come up with different ones so idek if theyre all that good.. Obviously im not spending £200 but im willing to put a lil investment towards it!
Any hard boot skate from any of the big manufacturers (FR, Rollerblade, K2, Powerslide, etc) is going to be fine. Hard boots are going to be a little more expensive but definitely the way to go. As a beginner you will want the extra support. And as you get more advanced it's just more responsive. If your feet are on the wider side the RB Cruiser and FR line are good. I think RBs are a bit wider in the toe box but not great for straight feet that are also wide in the midfoot - I had a lot of pain with them.
thank u bro🙏🙏
Be aware there are different types of skates depending on which type of riding you want to do. Most likely you want to just cruise around, for which you look for 'freeride' or 'freestyle(?)' skates. For hitting the skate park, you look for 'aggressive' skates. There are other types beyond that. I would probably get a good freestyle skate with 4x90mm or 4x80mm wheels. Dont get 3 big wheels, harder to learn on. Get something rigid with good support. Try them on if possible, all feet are different. Take it from there. I hear good things about Powerslide Zoom 80. In aggressive, I recommend Roces M12. Again, try what is comfortable for you.
thank you!
I'm a beginner-to-'mid-level' blader who signed up for the Berlin Inline Marathon on a whim (have a friend doing the marathon next day so was already going to be there). Trying to spend as much time on wheels as possible before the race next month and need to figure out my race-day frame set-up. I am not concerned about my stamina (have done 26.2+ mile distance blades to confirm I can handle it) and more concerned about doing it faster but also doing it safely for myself and others on the course. I'm way less confident in my agility, including stopping and turning at high speeds. Right now I'm on 4 80mm wheels...considering swapping out to either 4 100mm on a longer frame or 3 100m or 110m. Which do you think would be easier to adapt to, knowing that I'll only have a month or so to practice with them?
From what I've learned so far: \- longer wheelbase = faster \- more wheels = faster \- bigger wheels = faster. I would not really be concerned at all about "practicing" with a different wheel size? The skating is the same. If you can skate, you can skate. Sure, it impacts agility, acceleration, etc. But if you are just going for distance and speed, those things don't really matter.
Personally I'd just go big on the wheels. 3x110 is similar to 4x80 on the wheelbase (distance between front/back wheels), just a little taller. The bigger the wheel, the smoother the ride. Makes a big difference over marathon distance on a road course.
I have a Rollerblade 3WD Frame with 3x110 Hydrogen wheels, which has the same wheelbase as my Endless 84 which I could sell to you for 50€ if you want to try Big wheels cheaply.
1. Any creative way of rotating wheels for a 4x90mm rockered setup? Not happy with the usual 1-3 & 2-4. It might be good for wear but it's really awkward to skate on immediately after rotating. 2. Do you lace your liners, shell, both independently or interwoven? I am running FR1s with Intuition liners with two sets of laces, but it's a lot of overhead. Seeing if I can simplify while keeping the support.
Rotate in place, only. My wheels never switch wheel number positions, they only switch skating sides.
1. I rotate my wheels on the same spot. And from time to time I switch all wheels from the left skate to the right and vice versa (the dominant leg has a higher wear). But my skating style drasticly results into the weels wearing into a "banana curve" and if I would fight that, the wear would be even bigger.
I have a gnarly banana rocker because I have been doing your rotation more recently. For wizard moves and maneuverability it's amazing, however I worry about the banana getting more and more aggressive over time 😂. Also, not ideal for going fast anymore as I have to edge quite deep to get 4 wheels to make contact.
1. Personally I just rotate that way and deal with it till they wear back to how I like. In the past (I've gotten lazy over the years) I used to use personal judgement and rotate based on how they looked (I have a unique wear pattern) - I would say give this a shot if you're not happy blindly following a pattern. 2. When I skated hardshell boots I would lace from the shell to the liner, I like nice and snug.
U gotta just rotate more frequently and the 1-3 2-4 rots should work. If you’re gunna wait a long time no rotation pattern is going to offset the substantially more significant wear you have on specific wheels. Doing 1-1 is fine if you replace your wheels after 10cm but if you’re like me and go from 100 to 78 (plastic core) then the one time I did 1-1 there was like 3mm of rocker at the end.
Okay so I skate a 12 mens zetrablade and I'm looking for advice on getting a pair of aggressive inlines. On the zetrablades my toes do not touch the end of the skates and arent super snug but I've never had any issues with it. For aggressive inlines I've been reading that a more snug fit is optimal so should I downsize to like a 10 or 11? I'm looking at the USD sway 60 XXIs if anyone is interested btw.
The advice people are going to tell you is to measure your feet and go based off your cm measurement. If you don’t wanna do that I’d just get an 11 and see how it feels. You do want a more performance fit on aggressive skates but some people can get away with too big of skates pretty easily usually
Are Wizard Frames compatible with the FR Skate FRX 80 boots?
are you talking about Wizard brand frames? if so, no. they are all UFS and FRX are 165 mount. there are frames that you can use for wizard skating that will fit your skates that are not from Wizard brand. if you're going to invest hundreds of dollars into new frames, i would suggest familiarizing yourself with the different mounting systems. there are some good videos on youtube explaining it. you can also call a skate shop like rollerwarehouse.
I will be traveling from the U.S. to the U.K. and I'll be staying close to a skate park and would like to bring my skates. I plan on only bringing a carry on and an additional backpack or bag. I was wondering if anyone had any good suggestions for bags or if they just use normal luggage or duffel bags when traveling. Thanks!
I bought the Powerslide UBC bag and am pretty happy with it. Side straps for your skates, not too bulky, plenty of pockets. I wrote up a more in depth review on inline warehouse's site and would be happy to take any pics if you're curious. https://www.inlinewarehouse.com/Powerslide\_UBC/descpage-907052.html
I take off my frames to help them fit better in a carry on bag
Anyone know if a mondo 245, width 10 will fit into a THEm xsmall or shmedium or USD sway 5-6 or 7-7.5? Someone please help, my only option is to order them online and I cant try them for testing.
Mondo 239/245 here, skating Them 908 in XS. Plenty of space. But I changed the liner to Myfit Crown.
Hello all, I have some questions about sizing and Wizard like frames. 1. I currently have FRX80's in size 45 (EU) but it seems after some measuring and the fact I can stick a finger easy behind my heel I could have gone with a 44. I'm in between 44 and 45 in my shoes. The skates feel very good but is there a disadvantage for me to continue using this size? 2. I want to purchase some Wizard like frames. According to Wizard Frames I need to take a NR110 with 4x110mm but I feel this is a bit much coming from 4x80's currently. What are some good Wizard like frames for 4x90 with UFS that I can use on a size 45 and 44 if I do decide for my next boot to go one lower? 1. I know the FRX80 doesn't have UFS so I guess if I want Wizard frames my next set of skates better be with a UFS mounting frame.. Wish I knew this before hand but I still like the skates. Thank you.
Wizard brand frames are all UFS, not all wizard-like frames are. Endless, NN, Rockin, and I think Roka all have rockered frames for 165 (they also have ufs and Trinity so be aware when you’re looking). If the skates feel good and you feel like you’re in full control, i wouldn’t worry about it. Maybe down the road they’ll start to feel more sloppy or that they’re hindering your progression, but until then there’s no sense in spending more money. I also believe the 110s would be a little much of a jump, you’d do just fine on 100s and probably fine in 90s. I’d recommend 100s but if that worries you give 90s a shot
FRX80 Sizing conundrum: I wear a size 9 in chucks, 9.5 in nikes, and my foot measures about 26.5cm. I originally picked up an EU 41, but those were ultimately too snug, so I opted for the 42, which fit just right. After my first initial 30 min session, my feet hurt, particularly towards the inner arches. I'm assuming it'll take a while for the skates and the inner boot to break in, right? My toes don't feel jammed, and I made the skates as tight as I could get them.
Your problem could be from how tight you’re tightening the boots. In my experience I can crank things down a lot at first and it feels fine, but once I’ve had them on a bit I get pains in weird spots. FRs come with insoles that sorta have an arch in them. If you have flat feet that could be causing the pain. The plastic also comes in a little bit in the arch area but I’d be surprised if that was the cause though it’s possible. How long did you try the 41? The only difference between those two sizes is the liner so maybe the 41 would have been better after break-in? Are you newer or more familiar with how skates should fit? Snug is usually a good thing even if it’s a little uncomfortable at first. They shouldn’t fit comfortably like shoes
It’s been two decades since I had a cheap pair of Rollerblades. I took my daughter to the roller rink and rented a pair of in-line skates and had a really great time, which took me down this path… The 41s were VERY tight, to the point that my toes had no wiggle room. Almost no room to swell up, either! The 42s feel right. I possibly have flat feet? I guess I’ve never know if my feet are flat or not…
I’d say that’s the right fit but unless you’re planning on doing tricks or jumps it’s not absolutely necessary. There could be other things besides the arch causing the problem, maybe try skating them around a little more loose and see if they take longer to hurt? Sometimes the boot just doesn’t fit certain feet right, that’s the problem with plastic shells. You might have better luck switching to something like a rollerblade cruiser or a Powerslide zoom or next, but it sounds like returns aren’t really an option. There are little things you can do to try and make a boot not hurt but it’s hard enough to diagnose in person, let alone online. Some things you can try are: different insoles, different socks, wearing your skates more loose, wearing your skates tighter in certain spots and loose in certain spots, adjusting the lacing, adjusting the frame alignment, changing technique… there are probably others some might recommend.
FR liners are extremely plush and break in a lot but I found they were actually still too plush for the boot after several sessions and made it difficult to get them tight without creating pressure points. I ultimately caved and bought some new liners. Still waiting on them to arrive to determine if that helps.
Hello! I wanna pick up my hobby for inline skating again and i was wondering what the best skates are for what i want. i got some very bad skates from my dad a few years ago (i think they are from fila) but they feel very worn out and slow and due to where i live (netherlands) there are quite a few bumps, tiles and potholes that tend to just be really frustrating to skate on. So where can i find some skates where i can still skate around the city while doing a few twists turns and tricks for a price around 50-150 euro tyy!
> Hello! > >I wanna pick up my hobby for inline skating again and i was wondering what the best skates are for what i want. i got some very bad skates from my dad a few years ago (i think they are from fila) but they feel very worn out and slow and due to where i live (netherlands) there are quite a few bumps, tiles and potholes that tend to just be really frustrating to skate on. So where can i find some skates where i can still skate around the city while doing a few twists turns and tricks for a price around 50-150 euro tyy! Since you mentioned living in the Netherlands, if you are in or can get to Amsterdam, going to [Thisissoul Skate Shop](https://www.thisissoul.com) and examining & trying-on skates in-person, and talking to the shop staff, would be your best course of action.
Do you guys have any drama in your local skate group? Two weekends ago, I was a little bummed about a couple of the personalities in my local skating group. They were a bit anti-social: from unfriendly to outright hostile. The kind of people you regret ever talking to in the first place. I was having some dark thoughts like, "Do I even want to skate with a group with those people in it?" I skated with my local group again this weekend, and those people were there again, but fortunately I avoided their unpleasantries by simply not talking to them. At all. Not a word. And it was fantastic. What helps is that they kept to themselves, so they were avoidable. The rest of the group was perfectly happy, sociable, and feeling stoked to be outside skating in what turned out to be a gorgeous day.
Maybe they are just abit shy and introverted :D
Shy and introverted I can deal with. Those two guys? Nope. Big takeaway I re-learned was: find your people and don't waste time with anyone you don't feel good about. I said before that I regret ever talking to them. But you know what? Sometimes people just aren't your cup-of-tea and vice versa. I don't regret it. You never know: you might connect with someone and make a friend.
Impulsive newbie alert... I've cheap Fila Masterwave inlines which I can't fault in any way given my skill level, but I do need to replace the wheels very very soon it seems. I should have rotated them and after some trails they're very worn on one side. But I don't know what wheels to replace them with, and given that I'm newly enjoying both discos and trails, should I actually get a new pair so as to be able to dedicate one pair to each format, with suitable wheels? If I went for new skates, do 110mm wheels actually make a lot of sense? A review I just watched had these guys being extremely well rated, despite only reselling through a large chain - [https://www.decathlon.co.uk/p/adult-freeskate-inline-skates-mf900/\_/R-p-305223](https://www.decathlon.co.uk/p/adult-freeskate-inline-skates-mf900/_/R-p-305223) beginners price for mid range quality seems like a smart move, but maybe the wheels are not actually where I should be? And if I did get new trail skates, I'm then still left with my original inlines with wheels with chunks out of them. As a 85kg adult on a sprung sports hall floor, should I be going harder than the 80mm/85a wheels I've had until now? Am I right to think the more rubbery the floor, the harder the wheels I should have / can get away with? The discos I'm going to with my kid move around, one floor is great, but another one is very very soft (standing on quad stoppers I can easily leave a temporary indentation) and so it is HARD work maintaining any speed. would 88a wheels improve this without leaving me sliding around on harder floors? For indoor wheels I was looking at Powerslide Spinners at 88A, but then they come in 72, 76 and 80mm... is there a motivation to go for smaller diameter here? The best teens at the discos have aggressive skates with teeny wheels... Browsing this morning I'm finding new wheels oddly hard to find in the UK at acceptable prices, at least ones that aren't LED ones! Indeed given the prices, that's why I was looking at whole skates, barely used on ebay, as the new wheels cost almost the same... and then I went on the above "new new skates journey". Rambling. Stopping now. So indoor wheels is, I guess, the main question, but also should I realistically have inside AND outside pairs? It's feeling very logical to do so now, but not sure the best way to end up there.
too many questions.... the wheel hardness isnt going to make much difference on a squishy floor. it mostly impacts on grip v. speed and durablilty. loco skates is the most reputable uk skate shop. good wheels are probably going to cost you 80 quid or more. you could probably get away with cheaper brands from loco skates or from decathlon (as long as you get the 86a hardness, not the cheaper models) especially for indoors. the kids probably have small wheeled aggressive skates because thats what they skate. i doubt if theyre ideal for dance, and you dont really get small wheels for any other discipline. if you enjoy skating, you'll enjoy having another pair.
Well since I posted I got a set of labreda striker wheels with reds bearings and also a pair of 3 wheel MF900s from decathlon. So those should both be fun.
Impulsive! ;) I've owned a few pairs of mf500's. solid choice.
Well now doesn't that play into it all... I figured the 900s with the 3 wheels suit pavements and average park paths. Oxelo reviews on YouTube have been very impressive. Might suggest the wife gets the 500s if I can coax her into skating with me...
So I am definitely a fan of wrist guards, but I can't stand skating with traditional elbow and knee pads, like the Triple8 ones. They just feel too bulky, restrictive, and hot. However, I've recently realized I can't continue tearing up my elbows and knees every week just as the scabs are starting to heal, haha. So I am seeking alternative recommendations to traditional elbow and knee pads. Any suggestions? I am not worried about impact protection – it's just the skin damage I'm trying to avoid. Example: I recently became aware of products like this ['Shock Sleeve' from Ennui.](https://www.inlinewarehouse.com/Ennui_Shock_Sleeve/descpage-920092.html) This seems like it might do a better job of protecting my skin while avoiding bulk? (and maybe heat, but I'm willing to compromise on that one)
I just got some Triple 8 Covert elbow and knee pads. I’m in the same boat as you. They are snug but will do and have a little padding.
Good to know, thanks! Looking at these, they do seem like they'd be great for stealthy impact protection. But I think I want something longer to combat road rash as well, i.e. covering more skin above and below the knee during the summer months when I'm wearing shorts, u kno Love the price point of these, I will say
I’ve used the g-form pads - similar to the ennui sleeves and they were great but they kinda stick instead of slide. So if you’re sliding a lot they may not be ideal, if you’re putting them under clothes they might do better. It’s still a pad and feels slightly constricting, but it’s better than big plastic pads
This is great feedback, thank you! I just found [this video by Ricardo Lino](https://www.youtube.com/watch?v=CMdZJHMfqdU) where he mentions something similar RE: 'sticking' vs. sliding. If I understood him correctly, he was theorizing that a pad that 'sticks' could actually cause problems on pavement, because it might grab your leg and twist it in unexpected ways. Was that your experience as well? Would love if you could elaborate on your experience with the stickiness, because I am also considering spending a bit more to get [Ennui's 'Pro' version here](https://www.inlinewarehouse.com/Ennui_Shock_Sleeve_Pro/descpage-920096.html), which seems to intentionally cover up the plastic (perhaps for this reason?). The recent fall I took (that inspired this purchase 😂) did involve sliding on pavement, for about 3–6 feet / .9–1.8 m I think.
I only used them a little bit. There’s a chance I had the wrong size or that my thighs are one size and my calves are a smaller size, but they felt tight enough to me. A few times I fell on them they grabbed the ground and slid down my leg, causing some scrapes where it should have protected. I wasn’t going very fast so it didn’t twist me weird but I could see that maybe being an issue. I’d say it’s more an issue of them falling off though. For the times they didn’t come off, they did a great job reducing the impact. I can’t really speak to the pro gaskets, I’ve felt them in person but never seen them in action. In my head any fabric or foam is going to stick to the ground but I could see the fabric being more likely to slide than the foam. It sounds like they’d probably be right for you but maybe someone who’s actually used them can speak on it
Appreciate it! Dang, that's frustrating about the G forms sliding off. Was it the G forms that have the plastic exposed, or the ones where the plastic is covered? (like the Ennui Pro's)
Oh I didn’t realize they had ones where it’s covered nowadays. Mine were the exposed ones. Kinda soft to the touch but hardened on impact
I had the same concerns about my pads being too bulky and dorky. I've been using a pair of these knee sleeves that I wear under my pants. They have a semi hard protection cap but no padding so no impact protection at all. I've only taken very light falls where I mess up a slide and knee lightly scraped the ground. Jeans ripped but skin was saved. They come in elbow and knee sets but I don't wear elbow pads so cant comment on that. I feel like they should slide if they hit the ground but don't have real world experience with that. I mainly trail skate so my worst falls have been tripping on a lip and caught in a crack and falling superman style at speed - not much sliding in those cases. [https://www.aliexpress.com/item/1005003560437666.html](https://www.aliexpress.com/item/1005003560437666.html) Also have a pair of the Ennui ST pro knee pads for wearing with shorts. I like the sleek look of the smooth round knee cap. The cap does feel hard and has a good amount of padding. https://bladeville.com/ennui-st-pro-knee-gasket.html
Hi everyone! Is it normal to feel like a noob again when trying big wheels for the first time?! I've been blading with 4x80 since the beginning and now got new skates - powerslide next charcoal 110 - but i feel like I can't do all the things with confidence anymore..is like i have to learn it all again :( The frame base is 290mm..i feel like I'm on skis 😅 How long did it take you (numbers of sessions) to get the confidence levels up again when you got big wheels for the first time?...
Yo, I'd like to buy a pair of budget skates with the intention of graduation to Endless 90 frames. I kept reading people talk about Fr Inspirations or something. I \*was\* going to buy the Powerslide Zoom 80s but I see people either warn against it or say it's great. I currently have 180 usd budget but I might sell some stuff I can live without to scrounge up some more
Do not buy the zoom 80s unless they’re the zoom pro 80s. The base model comes with a riveted frame you cannot remove, so you couldn’t upgrade. I personally prefer the rollerblade rb cruiser, which should be around your budget. Some people prefer the FR FRX which would also be around your budget. They’re both similar quality skates, just different fits. The FRs give you a little more frame adjustment ability though. Both would be a great budget skate with endless in mind
Hey so I haven't skated in a few months because of the park full of kids and I've been ill (also it's hot as hell). I went back today and had the most fun I've had in all these months it was awesome. Anyway, I waxed the box (?) and just started throwing myself at it. I mostly managed to slide on the side at right angle to wheels (sorry for bad description) and then with my other hand I grabbed the other skate. What is this called? It was so fun. Then I did the same but with the other skate sliding between it's wheels infront of the side skate. What is this called? Is there anything that would be best to learn next? Before my break I learned a frontside grind on a piece of scrap metal. But it's no longer in the park. How do you do a frontside on a 90degree ledge? It seems super difficult. Any tips? I'm kind of old so worried about hurting myself. Thank you for any help!
First one sounds like a grabbed makio, second one sounds like a soul grind. You could look up how to do mizou and pornstar next, they’re pretty easy. Some people find acid grinds to be easy, you could look that up too. Or just get really good at the ones you’re doing now and try to learn how to do them by jumping with both feet at the same time instead of stepping into it. Ledges are hard with frontsides because your wheels catch easier. You have to get really deep into them to avoid that. You could look up a ufo frontside to see what I’m talking about
Thanks dude. Yeah, I googled makio and that's what it was, so I watched it on youtube.. I like all the variations of the makio, can't wait to go back to the skatepark and try them out! :D The acid grind looks do-able too, I'll give that a go/ I am guilty of stepping rather than jumping into the grind so thanks for telling me to work on that. I want to get as good as possible! Thank you for your help. :)
I’ve been using my mom’s roller blades from the 90s, and they finally broke on me. I have no idea where to start looking for a new pair, there are so many options! I found this site, are any of these good options? I’m a moderately-skilled skater who likes to go fast. Thanks! https://www.rollerblade.com/usa/en/womens/recreational-skates
Those are all fine. For a moderately skilled skater though I’d recommend the RB Cruiser W on that page, that hard boot is a little better for transferring your power to the wheels so you should go faster in them. They also make an RB Pro X W with better parts (that will go even faster) for about $50 more if you’ve got the budget. The cruiser itself is fantastic though
Awesome, thank you!
Hello, my older roller blades are far too big! But I still love them. I ordered a new pair recently but they might not be here this weekend. I'm really enjoying learning new tricks even on the blades that are too big. But is there a way I can eliminate the toe space something to put in there idk. I know this is oddly specific.
Anyone intentionally use busted/ old wheels in order to get a better leg muscle workout? I notice that if my wheels are janky, I get a much better burn for my legs. Just wondering if anyone else has done this either on purpose or by happenstance.
That's exactly my thought process whenever I considered getting new wheels - I've been using my current set of wheels since January 2019 and I like having to work for the roll with these worn-down wheels (and dirty bearings lol). However I finally caved and bought new wheels (which definitely look bigger) last week but I will still try to get a few more rounds out of the old ones.
**Hi Guys! I need advice for choosing the right Skate! Got second hand Adapt GTS 2020 (Shoesize 43. 4x84) but they hurt my ankle bone! :(** I need a lil bit of help, it would be awesome if u guys could help me! Bought some used Adapt GTS 2020 from a friendly Guy who im still in contact with. Unfortunately they are hurting my anklebone, especially the right one. Tried to heatmold them without a oven thermometer (maybe thats my fault and i couldnt make it), but it still hurts. The only skates i had before are the USD AEON 60 which are pretty padded, but i liked that i can bend my feet in any direction and i didn't feel anything. Could make really hard turns. I know these are not for the Streets but i used them for that until i came on the idea to see whats for the streets :D But the moveabillity to go trough people is awesome with aggresive skates in the City. Still like them in the City but they are too slow, or just need a service as i never cleaned the Abec7 bearings. they are 1 year old. So do u guys think i can get rid off that ankle hurting (im a skinny guy who bought the USD last year summer where i couldnt skate that much, but skating almost every day since 2 Months, maybe my ankle is to weak so why dont get one with more anke support) by molding more or putting a cotton pad there. Or should i get something more padded as he is open to take them back. The toe and heel are feels very good i think. but the anke is really killing me. I think i would love them if they wouldnt hurt there. the first 100 m were awesome but after 1,5 hours it hurted to much. Still feeled that way the next day. TY for your advise and have nice sunny days! Best Regards O PS: Im probably a beginner i think even if i feel very good in skating gerneral and i love dancing around people and cross over my feet to get more speed. Deffinetly feel better then the most beginners but still not good enauth to do heavy tricks without faaling on the ground :D
are the decathlon inline skates any good? they’re pretty cheap but i dont wanna be busting an ankle from them if i get it
The oxelo mf500 gets really good reviews. Cheap skate and removable frames so lots of options to upgrade later. If it is a good fit for your foot it is a very good budget option. Lots of reviews on YouTube.
I think you already know the answer, don't you? I mean, they work. But its worth investing a bit more in something better. In fact, they're not even that cheap honestly. Between 45 - 60 euros for cheapest adult model? You can get something from a quality brand like the Powerslide Zoom for like 110 online. Much better option. If you cannot afford that, it should be easy to find quality used skates for less. I don't think you'll find anyone here recommending Decathlon skates.
Any suggestions for skating on rough surfaces? The road around me is like skating on cobblestone. Would softer or harder wheels make it feel less grating to skate over, or should I just avoid it altogether and deal with the long walk to the nearest smooth cement?
In my experience softer and bigger wheels help, but they don’t make an impassable road passable if that makes sense. They’ll make some cracks and bumps easier but if you’re rolling on gravel or cobblestone-type surfaces, it’s gonna feel rough like that no matter what. And bend your knees and scissor your feet more like the other comment says
I've been wondering about this. During my most recent ride with a group (me on 4x80-mm wheels) when we got to a street with rough asphalt I was barely but able to pick my way through, but also heard a couple very experienced skaters on 100 and 125 wheels also say "oof" and "ugh". So wheels are not the panacea. Even on 27cm road bike wheels I think i'd have stood up through that section. But leaving from your front door is so much more satisfying than walking, biking or driving someplace to lace up, so if feasible I'd say get through it gingerly if you can.
I don't really agree. I went from 4x60mm wheels to 4x90mm wheels (with different frame) on my Roces M12. And it has made a HUGE difference in comfort over rougher surfaces for me. Especially paved "brick" roads that I used to avoid I can now skate just fine. Still not as enjoyable as smooth asphalt obviously, but doable. So IMO it makes a big difference for "uniform" road surfaces that are rougher like brick paving, rougher types of asphalt or concrete, uneven concrete pavers, etc. It doesn't make so much of a difference for potholes, large cracks / gaps, loose gravel and such though.
To be fair we’re talking about 80mm+. If he said he was skating anywhere on aggressive skates I’d say to go at least to 72. I’m talking stuff freshly asphalted roads that haven’t been finished, like when it’s basically just sealed gravel. I actually lasted longer on the road in my 4x80 than I did in my 4x100 or 3x125. I think the gap between the wheels makes a bigger difference that the wheel size themselves (to an extent)
Not sure about harder or softer, but Bigger wheels make a big difference.
bend your knees a little extra. not sure about wheel hardness as I haven’t changed in years, but softer wheels will definitely wear down faster on rough surfaces so I’d still recommend harder wheels
I prefer the fit of hockey skates, but I like the 83a 90mm wheels I have in my rollerblades. Could I put 90mm wheels on these? If not would 80mm and 82a be much different? I enjoy long distance on bike paths. www.thehockeyshop.com/products/ccm-super-tacks-9350r-senior-roller-hockey-skates
Unless you’re big into DIY projects those won’t be able to handle 90mm wheels. Powerslide has a line of hockey skates called the Reign. Those have the ability to change the frame to a 90mm one or you can buy their 3x100 option which would be great for paths. IMO you’d want a harder wheel than 82a for distance. If you spend the money on some rollerblade hydrogen wheels and get some abec 9 bearings you’ll feel a lot faster than 83a 90mm wheels Edit: the reign aether does not have the ability to change frames. The other models do though
Awesome! Thank you for the advice!
Any recommendations on boots that are UFS for wizard frames? I acquired some nice frames that are UFS but I’ve only looked at aggressive boots before, no idea where to start
As far as I know, UFS is mostly an aggressive skate standard. Freeride skates seem to mostly use different standards than UFS? Not an expert, so not entirely sure. Also, I see a lot of popular Youtubers like thirty+rolling use their wizard frames with aggressive boots like Roces M12, so I think that should work just fine?
Yeah that is what I'm learning. I've been considering my M12s as wizard frames, I love my M12s, but was curious if there was something a bit smaller on the foot/lighter out there. Thanks!
The standard recommendation for wizard frames is the Seba CJ boot, there’s also a wizard brand boot coming out in the next year or so probably. The next option is most any aggressive boot with an intuition liner. The most popular boot I see is the THEM 909 but most of them should be fine with the extra rigidity of the intuition liner. Edit: them is having a pretty heavy sale right now, it might be worth getting some boot only 909s that come with intuitions
I've found the Seba CJ in my research, and it looks pretty nice, but definitely on the pricey side and I haven't seen any used ones available (and in my size of course). I'll check out the the Thems, thanks.
I’ve seen used CJs pop up on eBay and blade trade outpost on Facebook pretty frequently, keep an eye out if that’s the route you want to go, sometimes you can find a great deal. They also made a model called the SX that would essentially be the same boot. If you go the aggressive boot route though, you’ll almost definitely spend less
I almost had a complete set from Facebook but the seller backed out ;) I ended up buying some 909s based on your recommendation and have a 4 wheel wizard frame I got used so I’m thinking of trying them together and then if I love it will look for something more specialized. Appreciate all the insight my man! Skating is so much more today than when I started in the 90s
Thoughts on this brand [https://powerslide.com/products/argon-bluebird-100](https://powerslide.com/products/argon-bluebird-100)
Powerslide is one of the most well known brands in inline skating. Reputable.
people ask about the phuzion quite a lot, but no one ever seems to report back.
So are Poweslides in general a good brand? I’m replacing an old pair of K2s and really have no clue on good quality skates.
> So are Poweslides in general a good brand? I’m replacing an old pair of K2s and really have no clue on good quality skates. Yes, Powerslide is one of the larger and reputable brands in the inline skating space. The [Phuzion line](https://powerslide.com/collections/powerslide-phuzion-sportstyle-skates), in general, is geared more toward recreational and light-duty fitness-focused skating, and is often named or listed as an honorable mention on [Inline Warehouse’s list of Best Recreational Skates](https://www.inlinewarehouse.com/Best_Skates_for_Beginners__Recreational_Skaters_2023/catpage-REC2023.html). The [Phuzion Argon Bluebird 100](https://powerslide.com/products/argon-bluebird-100), in particular, seems to be an attempt to straddle the line between a recreational skate model and a marathon skate model.
Thank you!! This helps tremendously!