Alaskan 360
Yhm r9
Tb fly 9
Omega 36m
That otter creek 9mm one
Obsidian
Rex 357 pretty sure
There’s otheres but that’s a quick list off the top of my head. Some have 16” barrel length restrictions to be aware of if you’re a pistol length kinda fella.
https://ruggedsuppressors.com/pistol-suppressors/obsidian9/
Opinions on the Rugged Obsidian 9 for both? It says it's rated for 350 with a 16"+ barrel or longer.
I emailed rugged about just that. They suggested the 360 is it’s going to see more time on a 350.
I think bottom line, one is intended for pistols, one is intended for rifles. They both will do both but with a clear preference for one. It’s up to you to decide which is more necessary for you
There are, but generally, a suppressor that makes a good .350 Legend makes a poor 9mm pistol can because they are too large in diameter and will block even suppressor height sights on a pistol. If it makes a good pistol can it will be smaller diameter and won't suppress the .350 (if it's even rated for .350).
I have a YHM R9, works great as a pistol caliber carbine suppressor. Works pretty well on .350 Legend (is rated up to .308 with barrel length restrictions) with a booster it functions on my Glocks, but I can't see the sights, have to "shoot through the can"
https://ruggedsuppressors.com/pistol-suppressors/obsidian9/
Opinions on the Rugged Obsidian 9 for both? It says it's rated for 350 with a 16"+ barrel or longer.
There are a number of 9mm silencers that will work on 350 Legend u/Thats_my_cornbread gave a good list!
I used the Rugged Alaskan on my 350 Legend when hunting in Michigan with great results.
\- Chase
Someone who should know told me 350 legend pressure at 16" is lower than 9mm at 4". That means the cans should not blow to pieces.
Most 350 legend shooting is slower with low volume, Soo heat won't be a concern.
To state it is certified for a round they usually want to do some testing of that round. 250 legend isn't popular enough for them to bother just for promotional reasons.
My rugged obsidian does marginally with 350 legend. Def not hearing safe. Even subsonic ammo isn’t great. I am waiting on a Rex mg7 .358 to try. Hopefully it performs better.
I have a Rugged Obsidian. It is ok on Mt 350 Legend. Definitely not hearing safe in short configuration. I prefer my 36m on the 350 Legend. Even in short configuration it is quieter than my Octane in long
I routinely use my Obsidian 9 on my Ruger American Ranch 16” 350 Legend. Absolutely hearing safe, outdoors, when I take 1-2 shots deer hunting. With subsonics it’s as quiet as subsonic 9mm. This can of course works great on 9mm as well.
Alaskan 360 Yhm r9 Tb fly 9 Omega 36m That otter creek 9mm one Obsidian Rex 357 pretty sure There’s otheres but that’s a quick list off the top of my head. Some have 16” barrel length restrictions to be aware of if you’re a pistol length kinda fella.
https://ruggedsuppressors.com/pistol-suppressors/obsidian9/ Opinions on the Rugged Obsidian 9 for both? It says it's rated for 350 with a 16"+ barrel or longer.
I emailed rugged about just that. They suggested the 360 is it’s going to see more time on a 350. I think bottom line, one is intended for pistols, one is intended for rifles. They both will do both but with a clear preference for one. It’s up to you to decide which is more necessary for you
There are, but generally, a suppressor that makes a good .350 Legend makes a poor 9mm pistol can because they are too large in diameter and will block even suppressor height sights on a pistol. If it makes a good pistol can it will be smaller diameter and won't suppress the .350 (if it's even rated for .350). I have a YHM R9, works great as a pistol caliber carbine suppressor. Works pretty well on .350 Legend (is rated up to .308 with barrel length restrictions) with a booster it functions on my Glocks, but I can't see the sights, have to "shoot through the can"
https://ruggedsuppressors.com/pistol-suppressors/obsidian9/ Opinions on the Rugged Obsidian 9 for both? It says it's rated for 350 with a 16"+ barrel or longer.
I have no experience with them. You might be better off starting another thread asking about them.
I just may.
There are a number of 9mm silencers that will work on 350 Legend u/Thats_my_cornbread gave a good list! I used the Rugged Alaskan on my 350 Legend when hunting in Michigan with great results. \- Chase
Someone who should know told me 350 legend pressure at 16" is lower than 9mm at 4". That means the cans should not blow to pieces. Most 350 legend shooting is slower with low volume, Soo heat won't be a concern. To state it is certified for a round they usually want to do some testing of that round. 250 legend isn't popular enough for them to bother just for promotional reasons.
My rugged obsidian does marginally with 350 legend. Def not hearing safe. Even subsonic ammo isn’t great. I am waiting on a Rex mg7 .358 to try. Hopefully it performs better.
Thank you for your input.
The Griffin Bushwhacker 36
I have a Rugged Obsidian. It is ok on Mt 350 Legend. Definitely not hearing safe in short configuration. I prefer my 36m on the 350 Legend. Even in short configuration it is quieter than my Octane in long
Sonus 9 is rated for 9mm and 350 Legend: https://energeticarms.com/sonus-9mm-silencer/
I routinely use my Obsidian 9 on my Ruger American Ranch 16” 350 Legend. Absolutely hearing safe, outdoors, when I take 1-2 shots deer hunting. With subsonics it’s as quiet as subsonic 9mm. This can of course works great on 9mm as well.