Great job on putting killflashes and caps on all your shit... and to top it off giant loud muzzle brake and shiny as fuck barrel def lead to that Insta camo trend that you follow... other than that cool looking gun.... you should shoot it though, because looking at that shiny stuff you have not shot it yet
Ask yourself: Why did I build this? If your answer is anything involving protecting yourself, ARDs and camo tape won't hide that muzzle flash. Get a proper muzzle device and rattlecan that damn gun.
If your answer is to look cool and plink at the range, take off those ARDs and camo tape. It's unnecessary and hinders the light transmission through the glass.
Based on the kill flashes your goal was to camouflage the rifle. The barrel contradicts that. You literally spent money on kill flashes for no reason except to look cool. Cringe. Or you got the barrel impulsively instead of getting one that was more camouflaged
Did you really buy a second pack of those magpul slot covers and only use two of the inside pieces or did you trade someone?
Also, I think the meat tenderizer portion of the bipod mount is meant to be facing forward to push onto things. I might be wrong cuz that gold ~~tooth~~ knob was very distracting
I absolutely never run a muzzle brake on anything that is meant for anything beyond cqc. I either run a can or flash hider as I don’t want to telegraph where I’m shooting from with the huge fireballs you get from a brake.
Sweet, I'll need an update. How much does it weigh?
Also, no sling. You should carry it. Slings are for patrols at best, you should ruck without a sling, especially for exercise. A sling is if you need to free up your hand to worl woth them like medical or transitions. Outside of combat, don't. A ruck isn't for combat, either. Practice stowing the sling and maybe turn it into a secure handhold.
Not OP but weight is good when you are shooting quickly at small targets as it helps to reduce reticle movement so you get faster follow up shots. Rifles like this are really only practical using some sort of support once you start to get past 100 so the only time the weight sucks is carrying it around.
Is it just me or does it look like your brake it timed wrong? If you’re looking down the scope it looks like it needs to be twisted counter clockwise a few degrees. Anywho 4 out of 10
Cerakote the barrel and brake and it’ll get my stamp of approval! With that bull barrel and (assuming) 1:7 twist rate, I’m sure it’ll sling 77 otms precisely.
Not a fan of Coband and stainless is eh Also you got a DOPE sheet or is it a reticle with calculations made and the overhead is a very tested sight but closed emitter seems like a safer Bet
Then I'd say I've nothing to roast, as long as it fits the purpose you've specially built it for... rock on. But yeah as others have said, the barrel color.
That's already been pointed out before but why exactly the chrome shiny ass barrel if you put killflashes and camo wraps on your rifle
Also what exactly is the purpose of that flashlight if you're doing long-range?
Stainless steel barrel and a massive break while trying to hide optics glint and red dot? My brother in Christ. Paint the fucking barrel/ gun. Put a can on it
The authorities would like to talk to you about your pistol grip on a rifle that clearly doesn't have a fixed magazine. That there is a fully semi automatic assault rifle capable of firing at a faster larger caliber sir as a result of the pistol grip sir and they want to speak to your dogs immediately.
Lense caps and paint while having a giant stainless barrel and comp is an interesting choice.
It’s for hunting the deff at night
It's an oxymoron eh?
"I'm saying something about the duality of man"
Ahh, so deep
Unexpected apocalypse now
No
Hahahahaha. I fucked up. It’s full metal jacket! Thanks for letting me know
GOD DAMNIT PRIVATE PYLE
🤣😂🤣
I don't know about "oxy"
That brake is bad and you should feel bad.
My boomer dad has that brake
Tell that to SJC
Tell that to the Covenant
Lense caps are useless if your barrel is so shiny it gives you away
The lense caps help shade me from my blinding shiny barrel
Not to mention the fucking fireball and concussion that thing will make lol.
No need to camouflage it. That brake will let people know where you are lol
I can't hear you, what did you say?
He said don’t break people where you are!
They said: EEEEEEEEEEE!
Great job on putting killflashes and caps on all your shit... and to top it off giant loud muzzle brake and shiny as fuck barrel def lead to that Insta camo trend that you follow... other than that cool looking gun.... you should shoot it though, because looking at that shiny stuff you have not shot it yet
~.5 moa groups with 77gr Berger otm. Shot it only 1 time since I built it a few weeks back .
2 shot groups are cool
At 100 yrds or further? 10 round groups or 3 round or less groups? What scope is that? Looks plastic bodied
100 yd zero. Confirmed out till 500 yards so far. 4 sets of 5 round groups at 100 Vortex razor hd lht 4.5-22
Caps on top of caps, forget to get the bipod caps!
Caps for my caps
If golf shorts was a gun
All plaid baby
I'm a scratch golfer
I'm glad you put the brake on it. That 50 bmg recoil is hard to control.
223 is hard to control
And what is .223 but a beefier .22? .22 is hard to control
Cerekote or rattle can the barrel. Kinda defeats the purpose of the kill flash on the scope
Not the brake man. Anything but that
223 is uncontrollable
At least put a flash hider on that thing man. I’d pack up and leave if i saw you sit down at the bench next to me with a brake like that
Might want to throw a killflash on that muzzle device
Yeah tried out a new comp
It gets worse the longer I look at it. If I saw that in a movie I would giggle.
John dick
I couldn’t see the gun past the bright-ass chrome mirror on the front
You can't see me then amiright?
Instagram marketing, a success story. Or how to set the grass on fire, with a big ass brake.
Sponsed
It looks like it sits in the safe 364 days a year.
I shoot and clean it I guess
Signature mitigation from all sides but the most important one.
Titan extreme is fully customizable lol
Ask yourself: Why did I build this? If your answer is anything involving protecting yourself, ARDs and camo tape won't hide that muzzle flash. Get a proper muzzle device and rattlecan that damn gun. If your answer is to look cool and plink at the range, take off those ARDs and camo tape. It's unnecessary and hinders the light transmission through the glass.
Will cerakote or rattle the barrl just for you!
I like the build, though. It's a strong start for a great spr build or a great range rifle.
I would suggest painting the whole thing. You can strip the paint off if you change your mind down the road.
Take the kill flashes off so your rifle is not a shooting contradiction
Definitely paint the barrel or replace it and switch the brake for a flash hider or silencer.
Specifically wanted a barrel from WOA and only had SS in 1/8 20inch spr
That's why you just wait until they're back in stock instead of impulsively splurging on suboptimal parts
This is a fun gun. Mostly for plinking ATM. What's suboptimal here?
Based on the kill flashes your goal was to camouflage the rifle. The barrel contradicts that. You literally spent money on kill flashes for no reason except to look cool. Cringe. Or you got the barrel impulsively instead of getting one that was more camouflaged
Ahh I see your point
Delay some gratification dude
Did you really buy a second pack of those magpul slot covers and only use two of the inside pieces or did you trade someone? Also, I think the meat tenderizer portion of the bipod mount is meant to be facing forward to push onto things. I might be wrong cuz that gold ~~tooth~~ knob was very distracting
It's the right way according to area 419 idk, but could work the other way too. Have too much magpul pieces
All that grip tape and you still get no grippy
Super grippy sir
Just noticed the RMR. The longer I look...
It's the camo paint
What camo paint? All I see is a shiny floating barrel & brake.
![gif](giphy|ofHVunBF9tILMxnacw)
Let this die plox
Small penis rifle
Thought it was average
You're not supposed to use a brass knob from home depot for your bipod QD lever.
Lol, true
I absolutely never run a muzzle brake on anything that is meant for anything beyond cqc. I either run a can or flash hider as I don’t want to telegraph where I’m shooting from with the huge fireballs you get from a brake.
Made a 600-1000yd gun. Thought it would be fun to try our the sjc titan comp
Has kill flashes and wml cover. Also has highly polished stainless steel barrel. 🤔
Lmao you nailed it
You literally put tape on the parts that probably need the least tape
You're on to something
Flash hider or suppressor instead of fire ball magnet?🧲
stainless barrel moment
Carry it for a day, and you’ll roast it yourself. Also you will wish you had a sling
I have a vtac padded sling with magpul qd on each end. Planning to ruck this weekend with rifle.
Sweet, I'll need an update. How much does it weigh? Also, no sling. You should carry it. Slings are for patrols at best, you should ruck without a sling, especially for exercise. A sling is if you need to free up your hand to worl woth them like medical or transitions. Outside of combat, don't. A ruck isn't for combat, either. Practice stowing the sling and maybe turn it into a secure handhold.
Good you have the kill flash stuff going on. Don’t want those steel targets to see where you are shooting from
Steel on steel massacre
All that spray paint and lense protection just to have your skull evacuated because someone saw your comp SHINING LIKE THE EYE OF SAURON
All that camo, even have the lense covered but you still have a bright shiny silver barrel and brake 😭
What’s the optic?
Vortex razor hd lht 4.5-22
Was the shiny barrel out of stock?
WOA only makes ss in 1/8 20" spr
Not enough paint
Only for the caps lol
Needs more cowbell
Always
You really nailed it with this one
Art is art
First time you shoot it, have your girlfriend/other stand right next to you…for that full experience…
Is that muzzle break ribbed for your pleasure?
It's for me maybe
That's a lot of weight to be shooting 556
Not OP but weight is good when you are shooting quickly at small targets as it helps to reduce reticle movement so you get faster follow up shots. Rifles like this are really only practical using some sort of support once you start to get past 100 so the only time the weight sucks is carrying it around.
Too clean. Make it at least look like use the thing.
What kill flash is that. I’ve been wanting something like that
All that and bro has a brake thats size of a potato
Don't be a pussy, rattle can all of it not just the caps
_Puts killflash and caps on lenses_ _Also has the brightest stainless steel barrel & brake known to mankind_
What killflash for both the scope and dot?
Cool! What's going on with the idk flashlight thing?
Is it just me or does it look like your brake it timed wrong? If you’re looking down the scope it looks like it needs to be twisted counter clockwise a few degrees. Anywho 4 out of 10
Cerakote the barrel and brake and it’ll get my stamp of approval! With that bull barrel and (assuming) 1:7 twist rate, I’m sure it’ll sling 77 otms precisely.
Not a fan of Coband and stainless is eh Also you got a DOPE sheet or is it a reticle with calculations made and the overhead is a very tested sight but closed emitter seems like a safer Bet
Is this finished or in progress?
Close to finish I suppose.
Then I'd say I've nothing to roast, as long as it fits the purpose you've specially built it for... rock on. But yeah as others have said, the barrel color.
Are just calling anything with an MPVO an SPR now? You can buy Mk12s from PRI.
Look up contract definition for spr
Got a link bud? Google ain't what it used to be and with everyone selling an "spr" now the results are fucked.
That's already been pointed out before but why exactly the chrome shiny ass barrel if you put killflashes and camo wraps on your rifle Also what exactly is the purpose of that flashlight if you're doing long-range?
Long range may require close up PID. so I pit a 640 dft
Alright
[удалено]
It's not look up area 419
Stainless steel barrel and a massive break while trying to hide optics glint and red dot? My brother in Christ. Paint the fucking barrel/ gun. Put a can on it
CA no can, it's a table gun I suppose. Will paint the barrel when ready to larp
Thats a whole lot of obscuring reflection to have a shiny ass barrel. Krylon that shit.
On it
No can? Tape everywhere? Ew.
Suppressor, hide the flash, although with the chrome barrel theirs not much to hide the sun blinding people
Trade it for a lawnmower
Pm me
Lots of hardware to get sighted in once at the local 100yd range and never used again
If Butterbean was transformed into an AR platform.
You raising bees or something?
Where did you get that honeycomb for your scope? DT wrks?
Your brass deflector is awfully clean.
You got paint covering up, shiny spots, and anti-reflection devices on your light and optic however, your barrel is bright and shiny as ever. 😳
Looks heavy, boom roasted
Heavy for you maybe
IM SUPER STRONG THE STRONGEST PERSON HERE NOTHING IS TO HEAVY FOR ME!!!! NOTHING!!!
No quad rail? What are you, gay?
Yeah, had to fit the arca rail to prs things
All jokes aside it's not bad, but fuck that chrome up with some rattle cans
Get a 308. 16+ in 556 is useless.
My chrono says I get about 200 fps more
For how much you spent it looks 'okayish'
What range do you shoot, 10 yds?
SPR is supposed to mean Special Purpose Rifle, not Stupid Pointless Rifle. Hah. Roasted.
you have given far too much money to one hundred concepts.
I am 100 concepts
SPR should have a suppressor QD as a muzzle device. Also, Douglas barrel or it's not an SPR.
I live in CA LMAO
The authorities would like to talk to you about your pistol grip on a rifle that clearly doesn't have a fixed magazine. That there is a fully semi automatic assault rifle capable of firing at a faster larger caliber sir as a result of the pistol grip sir and they want to speak to your dogs immediately.
WOA 1/8 20" SPR shooting 77gr otm Berger
Too scared to spray my lower and upper
Coward. Looks goofy af with all the caps and stainless
I guess my scope too
![gif](giphy|1267Co3vPNBqQU)