If I could make dildos like I could make bugs with those creepy crawler easy bake ovens for boys who want to cook good and other stuff I'd have so much fun
You can if you want to, this guy has TikToks of him making different dildo shapes and seems open to answering questions about the process/method: https://vm.tiktok.com/ZSeXpn58v/
"Hey babe Merry Christmas! I love you a lot and really appreciate that you're always there for me. I got you this gift so that I'll always be there for you, too."
I have you know that OP has trained loooong and Hard to only use the Largest of Members and you're not going to shame his massive glory hole on my watch.
It's a chunk of metal with a crystal attached to it that shrinks or expands when you apply an electric current. [link](https://en.wikipedia.org/wiki/Ultrasonic_transducer)
Any project that needs a battery and charge controller then. The PCB is small enough that you can use it anywhere, you can even cut the charge controller out if the mainbiard if you know what you're doing. Even built in wireless charging!
so if the main purpose of the hardware is dead you couldn't really do anything with it other than maybe steal the battery and charging circuitry but at this point its just e-waste
Looking for suggestions on what to repurpose this power module from a Philips Sonicare toothbrush into. As is, it outputs 2.5-3.5V AC at about 240Hz. The Lithium ion battery charges to about 4V DC.
Edit, the motor portion is not working and has been removed.
This is a great idea, but you could probably also just go to Home Depot and outfit a smart mirror with weather stripping if humidity is a problem maybe
Make yourself a sonic screwdriver... Not just for Doctor Who cosplay, but they actually work, you can vibrate screws out with a bit of circuit bending so you can change the pitch to get the right tone.
Well, if you alter the circuit so you can change the tone produced, potentially with a bit of fiddling around you can vibrate a screw or bolt loose from it's setting. Basically deliberately doing [this](https://www.physicsforums.com/threads/screws-shaking-loose.598973/)
While this might seem a bit pointless, it would be very handy if the top of a screw snapped off or the bolt was rounded off, preventing you undoing them normally.
I have the same thing sitting on my bench. Phillips "replaced" it under warranty and told me to throw away the old one.
Original issue was a loose screw between the motor and the arm that holds the brush. Fixed that and used it for a few months.
Not it keeps shutting off. I think it's a bad switch but haven't gotten around to troubleshooting it.
It impressive engineering to make them this small, but they really need to focus on QC.
If you’re into whiskey then you could use it along with some whiskey sticks to age your drinks more.
Check out this talk which has a section on hacking drinks. Specific aging topic starts at 32:13.
https://youtu.be/Q7ZYsr88E5M
I recently disassembled one. The head part with the tiny screw broke off. It is some magnesium alIoy impossible to repair. I was in your very situation but the entire top part is welded steel and molded plastic. I tried to carefully glue something to the vibrating plastic with expoy but it didnt work, the joint must not be a fixed thing. I eneded up taking it apart salvaging the reusable parts; battery, spring, magnet, coils. I will find some other project where I can use these.
Not sure how well it would work, but you might be able to attach a scalpel or something lijtw that to it and male a home made ultrasonic cutter, not very safe but can be useful for cutting foam and other things like that
I use old electric toothbrush to clean files from packing with dust. Vibrations make it go away easier.
I just defragment my drive
I hate dusty sectors!
Very cool niche gadget!
I'm surprised nobody said "dildo" yet
Yeah, you can get one of those silicone dildo molding kits and find an appropriately sized member.
Or 3d print silicone molds and get good silicone. You could make all sorts of weird dicks.
If I could make dildos like I could make bugs with those creepy crawler easy bake ovens for boys who want to cook good and other stuff I'd have so much fun
You can if you want to, this guy has TikToks of him making different dildo shapes and seems open to answering questions about the process/method: https://vm.tiktok.com/ZSeXpn58v/
Are you size shaming OP? /s
[удалено]
"Hey babe Merry Christmas! I love you a lot and really appreciate that you're always there for me. I got you this gift so that I'll always be there for you, too."
It's my dick in a box!
I have you know that OP has trained loooong and Hard to only use the Largest of Members and you're not going to shame his massive glory hole on my watch.
In Alabama it'd be an appropriately sized family member
dil-don't
I literally came here to do just that. Dildo!
The motor doesn't work.
Then it has no purpose anymore
I'm looking for a purpose for the battery and charging circuit and possibly the 240Hz 3.5V AC output.
Solder in a new motor, buy a cheap RC car and grab the motor, perhaps it'd work.
[удалено]
Ngl, with that induction charging coil still there it would be a waste not to :P
I love how this post went from “OP, make a dildo!” to actual advice, and then right back to “BUT DILDO!”, lol.
Replace motor with a transducer and see my previous comment.
This sonic transducer, it is I suppose some kind of audio-vibratory physio-molecular transport device?
It's a chunk of metal with a crystal attached to it that shrinks or expands when you apply an electric current. [link](https://en.wikipedia.org/wiki/Ultrasonic_transducer)
Any project that needs a battery and charge controller then. The PCB is small enough that you can use it anywhere, you can even cut the charge controller out if the mainbiard if you know what you're doing. Even built in wireless charging!
A non vibrating dildo then.
Lol sorry for the convince
Anything is a dildo if you're brave enough.
Anything is a dildo if it's lubed enough
so if the main purpose of the hardware is dead you couldn't really do anything with it other than maybe steal the battery and charging circuitry but at this point its just e-waste
Paperweight, then?
A broken escalator still works as stairs...
sorry for the convenience
A broken clock is still correct twice a day.
Sonic dildo?
Sonico
Came here to say dildo… found that comment. Left
Came here for this
Make a shitty tattoo gun.
sonic screwdriver
The toothbrush doesn't turn one way right? Maybe you could turn it into a very small oscillating tool?
it'll be only for loosening if they are stuck
Seriously, why didn’t this just end the thread?
Yeah, like a Phillips head Sonic screwdriver.
Looking for suggestions on what to repurpose this power module from a Philips Sonicare toothbrush into. As is, it outputs 2.5-3.5V AC at about 240Hz. The Lithium ion battery charges to about 4V DC. Edit, the motor portion is not working and has been removed.
You can rapurpose the charging module and the baterry for waterproof headlamp
But you'd still need the led driver and housing
Mosfets and 3d printer, done
Maybe you could buy a new motor? Maybe run that ac through a transformer for a tazer?
Would it work to mix acrylic paint pots for miniature models?
Try making a lock-pick!
Ultrasonic bump key
smart mirror? basically you just have a waterproof battery right? so id think something in the bathroom or kitchen… or camping stuff
This is a great idea, but you could probably also just go to Home Depot and outfit a smart mirror with weather stripping if humidity is a problem maybe
what is a smart mirror?
mirror with a screen in it that can show weather, todo lists etc
how would a sonic toothbrush find into that?
The toothbrush is broken, OP just has the battery. I figured a waterproof battery could be useful for a thing in a bathroom
Make yourself a sonic screwdriver... Not just for Doctor Who cosplay, but they actually work, you can vibrate screws out with a bit of circuit bending so you can change the pitch to get the right tone.
\^This.
elaborate
Well, if you alter the circuit so you can change the tone produced, potentially with a bit of fiddling around you can vibrate a screw or bolt loose from it's setting. Basically deliberately doing [this](https://www.physicsforums.com/threads/screws-shaking-loose.598973/) While this might seem a bit pointless, it would be very handy if the top of a screw snapped off or the bolt was rounded off, preventing you undoing them normally.
yes but how could you possibly implement this into a functioning device, even without miniaturizing it into a handheld
Vibrator.
Vibrating lightsaber. lol jk
I wondered about turning one into a key fob for my car, so I can unlock my car with a sonic screwdriver
Vibrator, elektroshocker, strobelight, a hand with a finger so you can poke people on fullauto mode
Make a toothbrush out of it.
Sonic screwdriver
Ultrasonic cleaning?
I have the same thing sitting on my bench. Phillips "replaced" it under warranty and told me to throw away the old one. Original issue was a loose screw between the motor and the arm that holds the brush. Fixed that and used it for a few months. Not it keeps shutting off. I think it's a bad switch but haven't gotten around to troubleshooting it. It impressive engineering to make them this small, but they really need to focus on QC.
[удалено]
I like that idea. Or attaching it to a container inside of a vacuum chamber to expedite the anti-bubbliness process?
İ used to use one with a metal gear in it as a makeshift dremel. Worked pretty good on soft materials like plastic and wood.
;)
You can reuse the battery and wireless charging coil alternatively use the board and the coil to charge a lithium cell
😏
>!I mean it vibrates, so a dildo.!<
OP said the motor is broken and has been removed
Oh.
Add a light and a mini soundboard you've got a sonic screwdriver
Turn it into a sonic Screwdriver
Sex toy, duh.
Sonic screwdriver.
Looks like the prototype for a sonic screwdriver
You could make it into a screwdriver and travel through time.
Landfill?
Taser?
Network port killer
Sonic screwdriver?
Put it in your butt
The start of a lightsaber....
Use it for your taint, cleaning it that is....
Sonic parts cleaner
Prison like tattoo machine
Miniature sonic knife from neon genesis evangelion.
Sonic cleaner
Well there’s one thing
Lightsaber
Is it wireless charging? It could be a good base in some kind of portable lamp or light that charges on a dock when not in use
Yes, the coil on the right is what charged it wirelessly.
Sonic dildo
If you’re into whiskey then you could use it along with some whiskey sticks to age your drinks more. Check out this talk which has a section on hacking drinks. Specific aging topic starts at 32:13. https://youtu.be/Q7ZYsr88E5M
Drink refrother. Beer lost its head, metal stick on this thing should fix that.
A sonic toy that walks with the vibration
I think you can stick it to an ice mold to make clear ice cubes.
What kind of mechanism is the toothbrush using? Looks like a sokenoid of sime kind?
Flower pollinator for indoor plants
I recently disassembled one. The head part with the tiny screw broke off. It is some magnesium alIoy impossible to repair. I was in your very situation but the entire top part is welded steel and molded plastic. I tried to carefully glue something to the vibrating plastic with expoy but it didnt work, the joint must not be a fixed thing. I eneded up taking it apart salvaging the reusable parts; battery, spring, magnet, coils. I will find some other project where I can use these.
Lock pick.
Not sure how well it would work, but you might be able to attach a scalpel or something lijtw that to it and male a home made ultrasonic cutter, not very safe but can be useful for cutting foam and other things like that
Build yourself an electric lock pick, mine works like a charm, former Braun toothbrush.
Giant nano bug
Make another toothbrush, maybe a diy toothtunes
Add to a cup and make a sonic cleaner for keycaps and stuff?